POSTED BY ADMIN ON Jul 14, 2023
Throughout the years, the exterior of your car faces numerous obstacles, such as contamination, oxidation, scratches, and other challenges.
Preserving your vehicle in a pristine condition becomes a challenge when there are multiple environmental threats. It is challenging but not impossible to keep your car in showroom condition after it leaves the dealer.
Among these challenges, oxidation is particularly severe, causing your car’s paint to become dull and faded. To gain a proper understanding of oxidation, let’s delve into it further.
What Leads to Oxidation
Oxidation refers to the deterioration process of a car’s paint. Over time, a chemical reaction occurs as a result of the paint being exposed to oxygen, heat, and ultraviolet rays.
Typically, oxidation reduces the ability of the paint’s oils to maintain color integrity, ultimately impacting the exterior’s shine. Interestingly, a vehicle initially begins to lose its luster before the color itself begins to degrade.
In reality, the color initially becomes dull, followed by a loss of gloss, and eventually leads to complete fading. Oxidation is responsible for the appearance of white spots on the car’s surface
At this stage, the clear coat has nearly eroded the metal surface, rendering your car vulnerable to rust, which can cause extensive and irreversible damage to the vehicle’s body.
While car paint cannot last indefinitely, there are methods available to address the oxidation of your car’s exterior. However, it is advisable to evaluate the current condition of your car’s exterior before opting for any treatment.
What are the major conditions of Oxidation?
Severe Oxidation
In cases of severe oxidation, it indicates that both the paint and clear coat have sustained significant damage, leaving no alternative except repainting the surface.
Moderate Oxidation
In instances of moderate oxidation, when the chemical process begins to manifest on the surface, it is crucial to take prompt action. Failure to do so can rapidly lead to further deterioration.
How to Recover the Lost Shine of Your Car?
By using the following procedures, you may postpone as well as recover the lost shine of your car.
First Clean the Affected Area
To avoid any contamination, be sure to thoroughly clean the afflicted area.However, it is advisable to properly clean the entire car because oxidation is usually not isolated to one surface but only visible on one surface. Always use high-quality car wash soap and pay close attention to every corner while keeping a focus on the specific area you will be working on.
Use Clay Bar to Remove Dead Paint
The dead paint must be removed in order to remove the clay. White areas on those appeasers became flaking due to oxidation. Particularly when the car is exposed to the sun and ultraviolet radiation more frequently, this extends farther to harm the succeeding places.
Find and remove any paint flakes that develop after oxidation before repairing the oxidation damage. However, the clay consistently seems to be an excellent material to remove certain exterior car damage.
You don’t want to remove the paint that is below the damage; instead, you should remove only the minimum amount of paint that is essential. Before taking concrete measures towards true recovery, this involves addressing the ailment that already exists.
Finish It With a Suitable Application of Polish
However, the polishing procedure consists of two stages: cutting and finishing. During the cutting phase, the application of a polishing substance aids in the gradual removal of the faded layers of paint, revealing the vibrant paint beneath due to its abrasive properties.
Nonetheless, it is crucial to handle this process with utmost care and minimize the amount of paint removed in order to achieve the desired outcome.
On the other hand, finishing is a technique for reviving the shine by increasing the interaction of oil with the paint. The procedure is required to essentially restore the shine you appreciate and admire.
However, the polishing procedure demands a lot of work. When applying the substance in a deliberate, slow, and half-circular motion, you must be stable. Now, you might be debating whether to apply such a material manually or with an electric polisher. If you used the machine, it would be a lot better.
If you’re working on a very tiny area, you might be able to finish the job without an electric polisher. However, if you’re doing everything by hand, it could be a little challenging. It’s challenging to achieve the smoothness required for a quality polish job, and you’ll inevitably become weary in the process.
However, it is crucial to select the best automotive service center to ensure top-quality and professional vehicle paint refinishing services in Dubai. At QuCars, we are here to help you restore your car’s exterior to a state of pristine shine and gloss. Book your car repair and services with QuCars at any time for exceptional results.